Not So Bad Robotics Switch

Submitted by gpmidi on Sat, 12/15/2018 - 21:38

Looks like the buttons are both fine - Once I got it apart and tested it with a multi meter it became apparent that the robotics enable button is just momentary - it's a different kind of switch from the power switch. Based on the LEDs on the LMD (Library Motor Driver) it looks like that might be the problem. I'm going to check the rest of the fuses first though.

Comments

Looks like the LMD might be ok - According to the user guide the solid green led, which normally means bad, is normal on the LMD only.