Firmware

Blackmagic Design | ATEM 1 M/E Production Switcher

Submitted by gpmidi on Thu, 03/17/2022 - 06:08

If you've got an old school ATEM 1 M/E Production Switcher and need to update the firmware but keep getting windows driver errors regarding writing to read only memory:

  1. Download ATEM software v6.9 and perform a firmware update via USB
  2. Configure the IP and optionally name
  3. If needed download the latest version and update the firmware via LAN
  4. If you have issues with the latest try 8.1.1.

A related post.