i6000

1. Connect to the service port
   1. It's that little black covered on that says not to use
2. Set your ip to 10.10.1.100
   1. The last octet can be anything but .1
3. Use 'telnet' to connect to 10.10.1.1
4. Login with "root" and "dallas"

I found this by using john the ripper on /etc/shadow in 10.10.1.1:/tftpboot/cmboot/initrd-dmcb (NFS). The initrd is gzip'ed. Once unzipped you can mount it with a loop device.

/etc/passwd

I'm sure some of you are wondering how much this project costs...

• 1x Scalar i2000 = $1755 + $432 shipping
• 1x Scalar i6000 = $2,500 + $750 shipping
• 6x Misc i2000/i6000 FC blades (2x 2Gbps, 4x 4Gbps) = $210
• 6x FC Quad Port HBAs = $260
• 2x Cisco DS-C9148-32P-K9 = $550
• Misc fiber, SFPs, patch panels, etc = ~$1,500
• 1x LTO-6 FC tape drive = $1,895

Total: ~$10,000